PS3 Jailbrk 4.55 CFW

Last Updated:
The latest4.55 Custom Firmwarehas been relsed from developerGameZ8ne. This is astandard CEX CFWwith the usual found in mostCFW's. GameZ8nlrdy joins the party of4.55 Standard CEX relses.So the choice is yours as these CFW have basically the same fture sets with a few minor changes in ch one. As with ANY CFW relseUSE AT YOUR OWN RISK. View all the ftures in this new relse from Homebrew & CFW DeveloperGameZ8nein the relse quote found below.

PS3 Jailbrk 4.55 CFW v1.00


RctPSN .Cinavia Disabled for HDD content playback only.noBD/noBT to allow installation on consoles with BluRay Drive or Bluetooth board.This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver <= 4.55HDD can be swapped/changed and the CFW will re-install without any problem. LV1 to disable LV2 Protection. LV1 to add peek/poke support. LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles) LV2 to add peek/poke support.QA Flag enabled by default to allow for sier downgrading using Recovery Menu.RSOD screen bypass for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)PSN/SEN access is available but it's not recommended.It can run games signed with up to version 4.55 without any Eboot/Sprx ing needed.The CFW can be used for Downgrading with Hardware flashers withPS3 Flash Tool v4.55

This CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW relse you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.

PS3 Jailbrk 4.55 CFW Install Instructions:1) Format your USB memory stick to FAT32 (many are this by default but you can always change this in by right-clicking the icon in My Computer and selecting format)2) Open your formatted USB stick and crte a new folder titled “PS3″(no quotes) without this the PS3 Jailbrk 4.55 CFW will not be found.3) Inside that folder crte another folder called “UPDATE”4) Download theCFW(Custom Firmware) files from the link below5) Double click the downloaded .RAR file to open it and extract thePS3UPDAT.PUP (PS3 Jailbrk 4.55 CFW) file to the folder you crted on the USB in the step above

You are now rdy to install the Custom Firmware aka PS3 Jailbrk 4.55Plse do this through therecoverymenu ONLY as below1) Power off the PS32) Hold on/off button on the front of the PS3 and Power on the PS3 at the back switch or wall outlet socket.3) Keep on/off pressed while PS3 boots up and until it then turns off again4) Relse on/off and press again and hold until you hr two quick beeps then relse5) You will now have the option to install firmware update using Recovery Menu. You should make sure that your controller is connected via USB and you inserted your USB memory stick.6) PS3 will now re-boot on completion of update.7) InstallPKGfiles from a USB Memory Stick via the new “Install Packages” menu item under Games in the XMB



Does PS3 Jailbrk 4.55 CFW work? 2878 Votes for Yes/ 10 For NO